Author: Sourav Chowdhury

Newsletter – Vol. 4 / Issue 1

Welcome to The Windham Weaponry Newsletter – Vol. 4 / Issue 1
January 2015

 

Marketing News Mark at SFGC

 

Mark Eliason, VP Sales & Marketing

 

With January’s ice, cold and snow making itself felt over the country, we thought we would highlight a rifle that embodies January’s stark beauty, our Electroless Nickel finish .308 Hunter with Pepper laminated hardwood stock & forend set.

This is just one of the many new rifles we’ve introduced. With its e-nickel receivers, Hogue Beavertail Overmolded pistol grip and 8.5lb light weight, it has been very well received not only for its accuracy, durability and value, but also its striking good looks!

See details in our Featured Rifle section below.

For those in the firearms industry who will be attending SHOT Show, please be sure to stop by

 

the Windham Weaponry Booth #10376.

We would love to shake hands, talk shop and show you all our new offerings.

Happy New Year!

 

 

 

This Month’s Featured Rifle
Windham Weaponry Electroless Nickel .308 Hunter 

 

 

Model: R18FFTWS-1-308   MSRP: $1587

Weight: 8.5 lbs. without magazine   Length: 39.5″

Caliber: 308 Winchester

 

Type:  Rifle – Semi-Automatic, Gas Impingement System

Capacity: 5 + 1 – Ships with one 5 Round Magazine – Accepts all other standard sizes

Receivers: Forged 7075 T6 Aluminum –  Flat Top Upper Receiver – with Integral Trigger Guard

Receiver Finish: Electroless Nickel – MIL-C-26074E

 

Bolt:  Carpenter 158 Steel

Barrel:  18″ Fluted Medium Profile – Chrome Lined with A2 Flash Suppressor

Barrel Material: 4150M Chrome Moly Vanadium 11595E Steel

Rifling: 1 Turn in 10″ – Right Hand Twist – 6 Lands & Grooves

Stock / Pistol Grip: Pepper Finish Laminated Hardwood w. Q.D. Sling Loop / Hogue Beavertail Pistol Grip 

 

Rear Sight: None – Ready for optics or other type accessory sights

Front Sight: None – Ready for accessory sights on Full Length Mil Std 1913 Railed Forend

Includes: Hard Plastic Carrying Case, Black Web Sling, Operators Manual, Transferable Lifetime Warranty

 

FROM THE GUNSMITH’S BENCH
Erik at his bench
Erik Winter, Gunsmith
 
TOPIC:

 

Installing the Mission First Tactical’s

2-piece Railed Handguard Set

 

First, make sure the rifle is unloaded, and then push out the takedown pin and the pivot pin and remove the upper from the lower receiver.

While pulling back on the delta ring tap the seam where the handguards come together on the edge of a table. When the handguards separate remove them from the upper. This may require two hands. If it is too difficult to remove, have another person separate the handguards while you hold the delta ring back.


The largest half of the MFT handguard goes on top. Note the orientation and where the groove in the back of the handguards will fit on the teeth of the barrel nut.


Put the front portion of the top handguard under the handguard cap, pull back the delta ring enough for the back of the handguard to rest under the delta ring. Then put the front portion of the lower handguard under the handguard cap and also pull the delta ring back far enough for it to rest on top of the handguard.


Now squeeze the two halves together until they snap all the way under the delta ring. If they are too difficult to seat all the way by squeezing them together use a plastic or wooden mallet to tap them into place.


 

 

CUSTOMER SERVICE CORNER         Cheryl E
Cheryl Eliason, Customer Service Manager
 

We receive a variety of customer service related questions from our customers, and in order to better serve all of you, highlight one question each month.

This month’s question is:

I am interested in your new 7.62×39 rifle, R16M4FTT-762.  Will standard AK magazines fit this rifle?

Answer:

No, AK magazines do not work in our 7.62×39 rifle.

The magazine needs to be an AR style magazine to be able to be retained properly in the lower receiver.  The magazines we are currently shipping with our 7.62×39 rifles (shown at right) are stainless steel and designed for that cartridge.

Magazines designed to be used in an AR15 in the 7.62×39 caliber should work.

 

 

FROM THE EDITOR

 

Karen Fogarty, Asst. to VP Sales & Marketing

 

 

 

  

 

 

CUSTOMER FEEDBACK

Greetings,

I just left this review on Google and I thought you might be able to use it.

I’ve owned the Windham Weaponery “CDI” for about a year and I have to say that it’s as tight as the day I bought it. The Diamondhead sights are spot on and the only adjustment is making sure the Picatinny rail is lined up from the upper to the hand guard (I strip the entire weapon after each use). At 100 meters the guns makes you look like a real pro. I’ve not had the chance to reach out beyond 100 meters, but given the opportunity I would bet money on the “”CDIs”” ability to accurately go much further. As far as the warrantee goes…I’m impressed. The dust cover started having a tough time of staying closed when not in use. I sent it to Maine and they replaced the entire upper as opposed to trying to bend probe, whittle or otherwise rig it to stay closed. I’m also very impressed with what I hold to be top priority; Customer Service. Every email or phone message was followed up very quickly and the level of courtesy equally impressed me. Among other thing anyone you talk to knows the business without trying to give it to me….. 10 out of 10

Merry Christmas,

Tod

***********************************************************************************************************************

Subject: 300 Blackout

Obviously, I love the look of the new 300.  I guess that means my HBC passes inspection, eh?

You can see most things I’ve added, but its the Brownell’s rapid fire control group by Geisele that makes it bark – and bite!

Thank you for the newsletter (I have a mail file just for them) and for the weapons coming out of your shop.

Chuck

San Antonio, Texas  (no snow on our rifles)


***********************************************************************************************************************

 

Subject: WW VEX Barrel Assembly

3 shots at 100 yards with 50 gr V-Max Blue Hills 223 Ammo

Wayne S.

 
WINDHAM WEAPONRY NEWS
 

Richard Dyke and Windham Weaponry receive Chamber of Commerce Service Awards

 

Pictured L to R are Allen Faraday, Matt Snow and Warren Dyke

At the Annual Meeting of the Sebago Lakes Region Chamber of Commerce on January 8th, Annual Service Awards were presented to those whose 2014 accomplishments were outstanding in leading and supporting our business community.  Richard Dyke received the “Frank Koenig Business Person of the Year” Award for his many years of exceptional encouragement, support and promotion of our business and personal community. Warren Dyke, President of Windham Weaponry accepted the award on behalf of Richard Dyke.

Windham Weaponry received the “Business of the Year” Award for its support of the business community and many programs to help those in need in the ten communities served by the Sebago Lakes Region Chamber of Commerce.  Allen Faraday, Exec VP of Operations of Windham Weaponry and VP of the Chamber, received the award on behalf of Windham Weaponry.

All of the Windham Weaponry employees are extremely gratified to be recognized along with Richard Dyke for these two awards recognizing all of our hard work and effort.

 

 
******************************************************

 

To send Newsletter comments or suggestions, contact:

newsletter@windhamweaponry.com

 

WINDHAM WEAPONRY FEATURED PRODUCTS Matt H - Retail
Matt Hasty – Retail Sales Manager
 

 

Here is your chance to show your Windham Weaponry pride at the range, around the kitchen table or anywhere in between. The Windham Weaponry 16 oz. coffee mug looks great and is easy to hold with a large handle. The travel mug will keep your hot drinks hot up to 5 hours and cold drinks cold for 8 hours with a non-spill top. Just click on the links below to place your order.

Windham Weaponry Mug

Part Number: ACC-MUG

Price: $9.95

 

For coffee, tea or any other beverage of your choice, we’re proud to offer the Windham Weaponry Logo Mug. This sturdy, gloss black mug holds 16 oz. and is emblazoned with our gold Windham Weaponry script logo measuring approx. 2.5″ wide x 1.25″ high. Makes a great gift for any Windham shooter in your life. Cheers!

 

BUY IT NOW

Windham Weaponry Travel Mug     

Part #ACC-TRVLMUG-BLUE

Price: $24.95

For those Windham Weaponry fans on the go, we offer this handy 16 oz. Windham Weaponry Travel Mug. With its sturdy aluminum body and clever trigger spout, this quality Contigo brand mug will keep your cold beverages cold, or the hot drinks hot! Bright blue anodized finish with the Windham Weaponry script logo in gold.

BUY IT NOW

LAW ENFORCEMENT

Todd C

Todd J. Coons, VP Law Enforcement & International Sales

What’s New in LE…

 

As many of us know, January is a crazy time in the gun business – with all of the Distributor shows, and of course the show of all shows, SHOT Show in Las Vegas. I will be at SHOT Show from January 20th to 22nd. If you are planning on attending the show, please stop by our booth, #10376, to see what’s new.

I would like to also let everyone know that I will be hosting an Armorer’s Course here at the factory on March 3rd and 4th. Please check out the training section of our website for a complete list of upcoming training opportunities:

Snow has been falling here in Maine and around the country, so I would like to showcase my VEX Snow Camo rifle R20FSSFTS-C1. From now until February 15th I will be offering this rifle at a discount. Please contact either myself (Tcoons@windhamweaponry.com) or my assistant, Cindy Thompson,(Cthompson@windhamweaponry.com) for special pricing.

 

As always, I want to personally thank everyone for supporting Windham Weaponry, and if you are traveling this show season, stay safe.

 

Todd J. Coons

VP Law Enforcement & International Sales 

Meet the WINDHAM WEAPONRY TEAM
Nick Catruch – Quality Control

Nick began working at Bushmaster in 2004, where he started out in the Production Department. After Bushmaster closed, Nick was hired to come back and work with the crew at Windham Weaponry in the Quality Control Department.

Outside of work, Nick likes to kayak, fly fish, duck hunt and biking if it is an easy trail. He spends his weekends seeking out amazing fine foods in Maine, as well as learning about businesses and their workings. He enjoys networking with people of all trades and the occasional dicker, swap or trade.

Nick is also very proud of his 7 year old son, Lucas, and enjoys spending time with his Papillion, Zoey.

 

 

Windham Weaponry on AR15.com
AR15.com Logo
    We regularly respond to questions and topics on this informative website.

 

Contact Us:
 

 

Windham Weaponry, Inc.
999 Roosevelt Trail / PO Box 1900

 

Windham, Maine  04062   U.S.A. 
Tel: 207-893-2223
Fax: 207-893-1623
 

 

Phone Sales/Customer Service:
Toll Free: 1-855-808-1888

 

 

 

Your feedback is always welcome. Feel free to send us photos of how you enjoy using your Windham Weaponry rifle. We would love to hear from you. Please contact us through  windhamweaponry.com/  or

 

 
SHOOT SAFELY,
Windham Weaponry Logo

Newsletter – Vol. 3 / Issue 12

Welcome to The Windham Weaponry Newsletter – Vol. 3 / Issue 12
December 2014

 

Marketing News Mark at SFGC

 

Mark Eliason, VP Sales & Marketing

 

For this month’s featured rifle, we will give you a sneak peek at our newest model, in a caliber that is also new, the 300 Blackout. We have had a lot of fun looking at accessory options to add onto this model, and have come up with a combination that we are very excited about.  Please see the details in our Featured Rifle section below.

The new 300 Blackout model will not be available for a couple months yet, but we plan on introducing it at SHOT Show in Las Vegas (Jan. 20 – 23), so come visit us at Booth #10376 if you will be attending the Show.

As a Christmas bonus to all our friends and customers, we are offering a 10% discount on all retail orders through December 31st, and will include free Ground shipping for orders over $100.00.

 

Merry Christmas from Windham Weaponry!

 

Note: For any last minute Windham Weaponry holiday shopping, we will be open Monday, December 22nd and Tuesday December 23rd, and will be shipping until 12:00 PM on Tuesday the 23rd.

This Month’s Featured Rifle
Windham Weaponry 300 Blackout 
 
Model: R16SFSDHHT-300   MSRP: $1680

Weight: 7.55 lbs. without magazine   Length: 38″ (34.175″ with Telestock collapsed)

Caliber: 300 Blackout / 7.62 x 35mm

 

Type:  Rifle – Semi-Automatic, Gas Impingement System

Capacity: 30 + 1 – Ships with one 30 Round Magazine

Receivers: Forged 7075 T6 Aluminum –  Flat Top Upper Receiver. Magpul Enhanced Trigger Guard

 

Bolt:  Carpenter 158 Steel

Barrel:  16 Medium Profile – Chrome Lined with Diamondhead “T” Brake

Barrel Material: 4150 Chrome Moly Vanadium 11595E Steel with M4 Feed Ramps

Rifling: 1 Turn in 7″ – Right Hand Twist

Stock / Pistol Grip: Hogue 6 Position Telestock w. Q.D. Socket Endplate / Hogue Beavertail Pistol Grip 

Forend: Diamondhead VRS-T 13.5″ Free Float Forend with 2 Q.D. Sling Swivels included

 

Rear Sight: None – Ready for optics or other type accessory sights

Front Sight: None – Ready for accessory sights on Full Length Mil Std 1913 Railed Forend

Includes: Hard Plastic Carrying Case, Black Web Sling, Operators Manual, Transferable Lifetime Warranty

 

FROM THE GUNSMITH’S BENCH
Erik at his bench
Erik Winter, Gunsmith
 
TOPIC: 

 

How to Install the Dead On Arms Trigger Guard

 

First make sure the rifle is unloaded. Then remove the lower from the upper by pushing out the takedown and pivot pins.  Remove the pistol grip using a 3/16″ allen wrench.  By removing the pistol grip it will allow you to make sure the trigger guard ear is able to flatly rest on the wooden block you will use to drive out the roll pin to avoid damage to the lower.  When you remove the grip make sure not to lose the safety detent which is in the receiver under the safety, and the detent spring which is in a hole in the pistol grip.

 

Cut two pieces of two by four and drill a hole in one.

Rest lower on the blocks of wood and support the stock area with the pistol grip as shown.

Slowly and carefully drive out the trigger guard roll pin with a 1/8″ roll pin punch into the hole in the block of wood.

Press in the front trigger guard detent with the punch and remove the stock trigger guard.

The DOA trigger guard should be orientated like this.

Press in the single detent on the front of the trigger guard and insert it into the front trigger guard ear.

 

Press in the two detents on the rear of the trigger guard and push them into the rear trigger guard ear until they click into the two holes.

 

Reinstall pistol grip being sure that the detent for the safety is back in the hole in the receiver, and the detent spring is back in the hole in the pistol grip and up against the detent.

Buy the DOA Trigger Guard here.

 

 

CUSTOMER SERVICE CORNER         Cheryl E
Cheryl Eliason, Customer Service Manager
 

We receive a variety of customer service related questions from our customers, and in order to better serve all of you, highlight one question each month.

This month’s question is:

What do you recommend for covering scratches on my rifle?

Answer:

We offer 3 products that work well, all available on our website.

For the aluminum parts – upper or lower receiver:

 1. Birchwood Casey Super Black Touch Up Pen- Flat Finish

https://windhamweaponry.com/shopexd.asp?id=435

 2. Birchwood Casey Aluminum Black

  https://windhamweaponry.com/shopexd.asp?id=434 

For the steel parts – barrel with black phosphate finish:

Birchwood Casey Super Blue Liquid Gun Blue.

  https://windhamweaponry.com/shopexd.asp?id=433

 

FROM THE EDITOR

Karen Fogarty, Asst. to VP Sales & Marketing

 

 

 

  

 

 

CUSTOMER FEEDBACK

******************************************************

Love your newsletters. Keep them coming!

Rob S.

Brownsville, Oregon

******************************************************

WOW, keep up the great work you ALL do, and keep the e-mails coming.

Frank D. (A Windham guy )

******************************************************

Thank you for newsletter , the wife & I own six HBC models & are very pleased with them. We’ve had friends of ours buy the same thing due to the fact they shot ours at the range & just flat out liked them. Thanks again for making a fine weapon.

Best Regards: And God Bless

Paul

******************************************************

 

I truly enjoy my WW AR15 .223, I had a different Mfg.’s before I bought the WW, had a lot of problems and could not get in touch with them when I needed answers. My dealer took it back and gave me back my money that I put towards the WW.  He no longer carries that other brand either. The Windham is made so much better and when I take it out to shoot I can be sure it will fire. The accuracy is amazing and I have commented to my friends who was looking for an AR to give the Windham a good look. Just wanted to pass along some good comments to you for producing a quality product.

Thank You, Thomas R.

 

******************************************************

 

Subject: Happy Customer!

Hello Karen,

I wanted to again let you know how happy I am with my Windham HBC. I haven’t kept up with the actual round count, but I’m certain that it’s over a thousand, and I’ve had ZERO issues with my rifle. All of the rounds have been brass cased and from several different manufacturers in both .223 and 5.56. Magazines have all been steel USGI, Colt, and the nice WW included magazine. I plan on purchasing other rifles from the Windham line up in the future, as I have no regrets on my first purchase.

Thanks for a great product and first class customer service. Oh, and keep those monthly newsletters coming. I know that they are a lot of work, but I always look forward to enjoying them.

Michael B.

 

******************************************************

 

To send Newsletter comments or suggestions, contact:

newsletter@windhamweaponry.com

 

WINDHAM WEAPONRY FEATURED PRODUCTS

 

Matt H - Retail
Matt Hasty
Retail Sales Manager

 

 

Diamondhead 45 Degree Off-set Integrated Sight System.

 

 

Part Number: DH-D45-SET

 

Price: $297.95

 

 

Diamondhead’s D-45 Integrated Sighting System stows flat under magnification optics, but deploys quickly at a 45° angle with the push of a button if your optic fails or you need CQC sighting. This Front & Rear set mounts easily on any Mil Std 1913 Rail, and is machined of Mil Spec Type III Anodized Aircraft Aluminum for strength, light weight and durability.

The combination photo shows the sight set folded flat, deployed from the rear, and deployed from the front. The patented, diamond shaped apertures and upper housing offer quick target acquisition, and centering. The Rear unit features same plane dual short & long range apertures that are the same height over bore as factory A2 sights. Rear sight windage adjustments are accurate to 0.5 MOA.

Made in USA and Lifetime Warranty by Diamondhead. Set shown below as Front & Rear folded flat (top 2 images) and deployed from rear (middle) and from front (bottom).


 

Rifles of the Windham Employees
 
This photo was taken by Windham Weaponry’s Engineer, Matt Snow.  “This is a photo of my personal .308 from one of my tree stands this year. It was the day before Thanksgiving when it was snowing like crazy“.
He didn’t mention whether he got a deer, or if this was just more extreme weather product testing!

 

LAW ENFORCEMENT

Todd C

Todd J. Coons, VP Law Enforcement Sales

What’s New in LE?

 

I have been on the road for most of late November and early December.  We had another successful Armorer’s Course November 13th and 14th here at the Windham Facility. Our friends from Academi bring excellent instruction to a very worthwhile two day event. Watch for information about our next course in Alpharette, Georgia next April, hosted by Windham Weaponry & Defensive Specialties, LLC.

It was off to Las Vegas in early December, where we exhibited at the Rocky Mountain Elk Foundation Hunter Christmas Expo. The event was lots of fun and a chance to meet great people.  We had a very busy booth, as we gave away a new Windham 7.62 x 39 rifle and had Professional Rodeo Cowboys Kaycee Feild and Cody Teel visiting in the Booth with us.

I hope the Holidays are great and safe for all our friends in the Law Enforcement community, and if you’re thinking of a new rifle for the New Year, please go to our website to see all the Law Enforcement model offerings windhamweaponry.com/le/weapons.asp#axzz38yWfyqpl and if you don’t see what you want, just let us know and we’ll see if we can custom build it for you.

For pricing, please email my assistant, Cindy, at Cthompson@windhamweaponry.com  or me at

Tcoons@windhamweaponry.com

 

Be Safe,

Todd J. Coons

VP Law Enforcement Sales    

Meet the WINDHAM WEAPONRY TEAM
Glenn Edwards, Facilities Manager

Glenn began working for Richard Dyke at Bushmaster in 1999 as the Facilities Manager, where he worked for 12 years until they closed in 2011. He joined Windham Weaponry when they opened in July 2011 in the same role.

Glenn is our resident Jack of All Trades and takes care of everything from routine maintenance, equipment repair, construction, Hazmat disposal and everything in between. There doesn’t seem to be anything he cannot build or repair, and we can always count on him no matter what time of the day or night it might be. Glenn is always there to not only take care of the business park, but also the employees. There have been countless flat tires and cars with dead batteries for which he has come to the rescue.

Outside of work, Glenn loves riding his Harley Davidson, boating on Long Lake, hunting and gardening, and he also knows his way around a kitchen!

Windham Weaponry on AR15.com
AR15.com Logo
    We regularly respond to questions and topics on this informative website.

 

Contact Us:
 

 

Windham Weaponry, Inc.
999 Roosevelt Trail / PO Box 1900

 

Windham, Maine  04062   U.S.A. 
Tel: 207-893-2223
Fax: 207-893-1623
 

 

Phone Sales/Customer Service:
Toll Free: 1-855-808-1888

 

 

 

Your feedback is always welcome. Feel free to send us photos of how you enjoy using your Windham Weaponry rifle. We would love to hear from you. Please contact us through  windhamweaponry.com/  or

 

 
SHOOT SAFELY,
Windham Weaponry Logo

Newsletter – Vol. 3 / Issue 11


Welcome to The Windham Weaponry Newsletter – Vol. 3 / Issue 11
November 2014

 Marketing News Mark at SFGC

 

Mark Eliason, VP Sales & Marketing

 

Last month we spotlighted 4 of our .308 models with hunting season on the horizon.  This month, we have received a lot of positive feedback from hunters who are using our .308s, with accuracy being the top attribute.  After trying out one of our new 18″ .308 with the Midwest rail and Magpul fixed stock, I liked it so much, I bought one myself!

Our featured rifle this month is actually an AR style pistol, which is now available.  We are in the development stages of other pistol models and continue to add to our product line and will keep you updated on new offerings.

This Month’s Featured Rifle
Windham Weaponry AR Pistol   
 
Model: RP11SFS-7   MSRP: $1264.00

Weight: 5.65 lbs. without magazine   Length: 27.25″

Caliber: .223 Rem. / 5.56mm

 

Type:  Pistol – Semi-Automatic, Gas Impingement System

Capacity: 30 + 1 – Ships with one 30 Magazine (accepts all sizes)

Receivers: Forged 7075 T6 Aluminum –  Flat Top Upper Receiver – Aluminum Trigger Guard

 

Bolt:  Carpenter 158 Steel

Barrel:  11.5″ Fluted – Chrome Lined – M4 Feed Ramps – with A2 Flash Suppressor

Barrel Material: 4150 Chrome Moly Vanadium 11595E Steel

Rifling: 1 Turn in 7″ – Right Hand Twist

Receiver Tube: AR Pistol Type w. Foam Sleeve & WW Laser Engraved Logo

Pistol Grip: A2 Black Plastic Grip 

Forend: Midwest Industries 10″ SS Key Mod 10″ Freefloating Handguard with 2″ Rail Segment

 

Rear Sight: None – Ready for optics or other type accessory sights

Front Sight: None – Handguard Rail Ready for accessory sights

Includes: Hard Plastic Carrying Case, Black Web Sling, Operators Manual, Transferable Lifetime Warranty

 

FROM THE GUNSMITH’S BENCH
Erik at his bench
Erik Winter, Gunsmith
 
TOPIC:  Bolt Carrier Cleaning                                                          

 

These photos show a rather extreme example of a dirty carrier which hasn’t been cleaned in about 5000 rounds.

For cleaning a carrier I like the Carbon Scraper Tool and Wipe Out Tactical Advantage Cleaner (see links below to purchase). Here I just simply applied the Tactical Advantage and used a toothbrush. You can also soak the carrier in this solvent to make carbon removal even easier as it won’t harm the chrome lining. Any places you can’t reach with the Carbon Scraper Tool, you can use a razor blade to carefully remove thick carbon deposits. But if you don’t go 1000 rounds or more without cleaning your carrier you won’t have this much carbon to scrape off. Also note that you can use the part of the scraper used for the bolt tail to clean carbon from the retaining pin area of the firing pin.






Clean and ready to roll!

AR15/M16 Bolt & Carrier Carbon Scraper:

http://www.windhamweaponry.com/shopexd.asp?id=302&bc=no#axzz3IPkB9Egc

Wipe-Out Tactical Advantage Bore Cleaner:

http://www.windhamweaponry.com/shopexd.asp?id=262&bc=no#axzz3IPkB9Egc

 

CUSTOMER SERVICE CORNER         Cheryl E
Cheryl Eliason, Customer Service Manager
 

The Heart of Windham Weaponry – Giving Back to Our Community

 

Richard E. Dyke, founder of Windham Weaponry, and all of his employees, have long been dedicated to supporting those in need in our local communities. It is a responsibility that each of us take very seriously as we try to make a difference in the lives of individuals, families and children that need a little help to get through a trying time.

Windham Weaponry has been the major sponsor for 3 years of our local Community Coin Challenge and Octoberfest Celebration which raises funds for our local food banks. Our employees also voluntarily donate funds through payroll deduction to support a food backpack program in our local schools. This program is able to provide 150 students with much needed food to take home for the weekends.

The Windham Weaponry Helping Hands program is another program that all our employees participate in. As each of our employees hear or know about a critical need in their hometown, they bring it to our Helping Hand committee. We have helped hundreds of individuals and families from our employees hometowns with help to get them through a very difficult time and, hopefully, made a difference in their lives.

Richard Dyke has inspired this effort in the way he generously deals with his employees and his “giving back” over his lifetime. His book, “Richard E. Dyke, Just a Man from Wilton, Maine”, will show a glimpse of how he became the man he is today. All of the proceeds from the sale of this book will go toward our Helping Hand program.

 

Buy the Book Here

 

FROM THE EDITOR   

 

Karen Fogarty, Asst. to VP Sales & Marketing

 

 

 

   

 

 

CUSTOMER FEEDBACK

Subject: Incredible accuracy!

Greetings,

If you want to know what your weapons are capable in the hands of your customers, attached is a 2.292″ group shot at 300 yards on 4/8/14. This .730 MOA group was shot from a bench rest using Corbon 55gr JHP rounds. The weapon was a Windham 5.56 HBAR/flattop (made for Cabelas), sporting an SWFA 1-6X scope @ 6x. The only alteration is a Giessele S3G trigger which is actually NOT recommended for shooting groups!

You guys should be proud to have produced a weapon of this quality. I’m certainly proud to own it.

Regards,

Chuck R.

  

*****************************************************************************************************************************************

I am relatively new to the “AR” market, but purchased your AR-15 .223 about a year ago and love the way it shoots. I want to get one of your .308 models!

I love your guns! Keep ’em coming!

Thanks.

Mike B.

*****************************************************************************************************************************************

Here’s a pic of my carbon SRC after I added some goodies.

Jeff Y.

New Castle, VA

**********************************************************************************************************

Subject: Fur down

 

After long day of calling in the wind, my last stand finally got this guy to come in.  The Windham dropped it in its tracks.  This is one of five I took off a piece of farmland, farmer had issues with missing chickens. Big thanks to Windham Weaponry, Hornady ammunition and Toxic calls.

Jose M.


 

*****************************************************************************************************************************************

Emily B’s first deer with her WW Muddy Girl – Raymond, Maine

To send Newsletter comments or suggestions, contact:

newsletter@windhamweaponry.com

 

WINDHAM WEAPONRY FEATURED PRODUCTS

 

Matt H - Retail

 

 

Matt Hasty, Retail Sales Manager

Nightstick 180 Lumen Polymer Tactical Rifle Light Kit

 

 

Part Number: FL-NS-300B

 

Price: $69.95

 

The Nightstick Tactical Long Gun Light Kit provides everything necessary to add a high-power tactical light to any long gun that has a Picatinny or Weaver rail. The kit includes the Nightstick TAC-300B 180 Lumen Polymer Tactical Light, a Remote Pressure Switch with momentary on/off control, a Standard Tail Switch with momentary or constant-on functionality, a Removable Pocket Clip, an Aluminum Quad Lock Mount, a self-adhesive Velcro strip, an alcohol pad for surface prep, installation hex wrench, and two CR-123 Lithium Batteries. The light is made from a glass-filled nylon polymer and features an effective beam distance of 190 meters (over 623 feet) …perfect for long-distance target acquisitions. With a wide secondary halo of light, the TAC-300B is equally effective in CQB situations. CREE® LED technology offers an LED bulb life of 50,000+ hours. The 1″ handle diameter fits the included mount, and a 1.25″ head diameter accepts 3rd party filters. It is waterproof, hardened to withstand weapon recoil, and resistant to chemicals. Length: 6″ (152 mm) Weight: 6.3 oz (179 g) Limited Lifetime Warranty by Bayco Products.

Nightstick 800 Lumen Aluminum Tactical Rifle Light Kit
Part Number: FL-NS-460XL
Price: $89.95
 

Add a high-power tactical light to any Picatinny or Weaver rail equipped long gun with the Nightstick Tactical Long Gun Light Kit. This light is made from Aircraft-grade 6061-T6 Aluminum w/Type III Hard Anodized Finish and features an effective beam distance of 205 meters for long-distance target acquisition. With a wide secondary halo of light, the TAC-460XL is equally effective in CQB situations. CREE® LED technology offers an LED bulb life of 50,000+ hours. Included are the Nightstick TAC-460XL 800 Lumen Metal Tactical Light, a Standard Tail Switch with momentary or constant-on functionality, a Removable Pocket Clip, an aluminum Quad Lock Mount, installation hex wrench, self-adhesive Velcro strip, an alcohol pad for surface prep and two CR-123 Lithium Batteries. The 1″ handle diameter fits the included mount, and a 1.25″ head diameter accepts 3rd party filters. It is waterproof, hardened to withstand weapon recoil, and resistant to chemicals. The metal case features a non-slip grip, large textured tail-switch, and is serialized for personal identification. Length: 6.7″ (170 mm) / Weight: 7.6 oz (215 g) / Limited Lifetime Warranty by Bayco Products.

BUY IT NOW – No Link Yet

LAW ENFORCEMENT
Todd C

Todd J. Coons, VP Law Enforcement Sales

What’s New in LE?

October brought with it a nice increase in AR sales. With hunting season around the corner .308 sales were brisk. I want to thank those of you that took advantage of our discounted prices on our .308 line and want to wish those of you that will be taking your new rifle hunting the best of luck.

We here at Windham Weaponry also had the opportunity to partner with the guys from Legally Armed America again as we traveled to Eagle Pass, Texas to shoot some hogs. It was just an amazing time. Here is a link to learn more about the hunt, the Hog Shot Challenge and to learn a little more about what we have going on with Legally Armed America. http://legallyarmedamerica.com/2014/11/02/makin-bacon-at-the-hog-summit-with-our-brand-new-rifle-benefitting-autism.

I will be sending out more information on the event, as well as some photos very soon. I would like to personally thank Paul and Chad from Legally Armed America and Daniel and his crew at 4 Amigo’s Ranch. Daniel and his crew went above and beyond to make us all at home in his home. So, if anyone wants to shoot some hogs and have a whole lot of fun, check out 4 Amigo’s Ranch in Eagle Pass Texas. http://www.4amigosranch.com.

I would also like to let everyone know that I will be attending the National Rodeo Finals in Las Vegas the week of December 1st. I will have a booth at the RMEF Hunter Christmas in the Las Vegas Convention Center, Booth #730 from December 4th to the 7th. Please swing by the booth and register to win a new Windham Weaponry 7.62×39 SRC and to meet Kaycee Feild and Cody Teel, as they will be signing autographs. Kaycee will be in the booth on December 7th from noon to 1pm and Cody Teel will be in the booth on December 6th from 1pm to 2pm.

Thank you to everyone out there for supporting Windham Weaponry.

 
Be Safe,
 

Todd J. Coons

VP Law Enforcement Sales    

Meet the WINDHAM WEAPONRY TEAM
 
Dennis Rand, Shipping Department

Dennis joined Windham Weaponry in March 2013, and has proved to be a great addition to our shipping team.   When talking about Windham, he says “Great company, great people, I love coming to work every day.”  That feeling is evident when you see Dennis, as he is always ready to help in any way he can and always has a smile.  Dennis has been involved in shipping for over 20 years in various roles.  He is also very proud to have served his country in the United States Army for 7 years.

Outside of work, Dennis loves sports and family get-togethers, going to his son’s high school sporting events and anything involving family.  He is the father of a beautiful blended family, with his wife, Connie, and their sons, Travis, 23, Nathan, 19, Ryan, 17 and daughter Alyssa, 19.


Windham Weaponry on AR15.com
AR15.com Logo
    We regularly respond to questions and topics on this informative website.

 

Contact Us:
 

 

Windham Weaponry, Inc.
999 Roosevelt Trail / PO Box 1900

 

Windham, Maine  04062   U.S.A. 
Tel: 207-893-2223
Fax: 207-893-1623
 

 

Phone Sales/Customer Service:
Toll Free: 1-855-808-1888

 

 

 

Your feedback is always welcome. Feel free to send us photos of how you enjoy using your Windham Weaponry rifle. We would love to hear from you. Please contact us through  windhamweaponry.com/  or

 

 
SHOOT SAFELY,
Windham Weaponry Logo

Newsletter – Vol. 3 / Issue 10

 

Welcome to The Windham Weaponry Newsletter – Vol. 3 / Issue 10
October 2014

 

 Marketing News Mark at SFGC

Mark Eliason, VP Sales & Marketing

 

With hunting season upon us, perhaps you’re out hunting for a new rifle? Our line of .308 models will surely interest the deer, bear, moose, elk or feral hog hunters all over the country.

Whether it’s our beautiful .308 Hunter with laminated nutmeg wood stock and coyote brown receivers, our standard .308 SRC, its colorful cousin, the .308 Timbertec Camo SRC or this month’s featured rifle the R18FSFSM-308, you are going to be pleased with the .308’s fine accuracy for those long shots, the reliability and functionality Windham is famous for and the pride in the long lasting value we build into every rifle.

We back that up with an industry best Lifetime Transferable Warranty. So, check out a Windham Weaponry .308 before your next hunt and stay safe out there!

WW Model #: R18FFTWS-2-308  /  MSRP: $1587.00

 

WW Model #: R16FFT-308  /  MSRP: $1413.00

 

WW Model #: R16FFT-308-C3  /  MSRP: $1533.00

See more .308 models in the LE Section of this newsletter – or see them all at windhamweaponry.com/

This Month’s Featured Rifle
 
Windham Weaponry R18FSFSM-308  
 
Model: R18FSFSM-308   MSRP: $1732.75

Weight: 8.45 lbs. without magazine   Length: 38.875″

Caliber: 308. Win.

 

Type:  Rifle – Semi-Automatic, Gas Impingement System

Capacity: 20 + 1 – Ships with one 20 Round Magpul PMag Magazine

Receivers: Forged 7075 T6 Aluminum –  Flat Top Upper Receiver – Integral Trigger Guard

 

Bolt:  Carpenter 158 Steel

Barrel:  18″ Fluted – Chrome Lined with A2 Flash Suppressor

Barrel Material: 4150 Chrome Moly Vanadium 11595E Steel

Rifling: 1 Turn in 10″ – Right Hand Twist – 6 Lands & Grooves

Stock: Magpul MOE Fixed Buttstock

Pistol Grip: Hogue Overmolded Pistol Grip 

Forend: Midwest Key Mod 15″ Handguard with 5 Q.D Sling Swivel Sockets

 

Rear Sight: None – Ready for optics or other type accessory sights

Front Sight: None – Handguard Rail Ready for accessory sights

Includes: Hard Plastic Carrying Case, Black Web Sling, Operators Manual, Transferable Lifetime Warranty

 

FROM THE GUNSMITH’S BENCH
Erik at his bench
Erik Winter, Gunsmith
 
TOPIC:                                                           

 

 
Installing Telestock Endplate with Quick Detach Socket and QD Swivel


First verify that rifle is empty, and then push out the pivot pin and takedown pin and remove lower receiver from upper receiver. Push buffer detent in and remove buffer and spring and set aside.

With the lower on an AR15 lower receiver vise block, loosen stock castle nut with a tele stock wrench.


Screw the castle nut all the way back and pull the end plate back exposing the takedown pin spring and pull the takedown spring out and set aside.

null

Hold your thumb over the buffer retainer and unscrew the buffer tube. Once it is backed off of the buffer retainer slowly release the buffer retainer but leave it in the lower.

Remove stock and remove the stock endplate and install the QD endplate so it looks like this.

Screw buffer tube back onto rifle all the way in until it comes up to the buffer retainer. Then press the buffer retainer back in and screw the stock around until it goes over the shoulder of the retainer enough to hold it in the rifle but not so far that the retainer binds against the tube.

Now put the takedown pin spring back in its hole in the receiver and carefully push the QD endplate up to the receiver.  Compress the spring into the receiver without bending it over and screw the castle nut up to the back of the endplate.

Make sure the stock is straight and tighten the castle nut up against the endplate.

Press the button on the back of the QD swivel and insert it into the socket in the endplate.


Now you are ready to mount your single point sling to the swivel.


Here are links on the Windham Weaponry website to the various parts described in this article:

Q.D. Endplate:

http://www.windhamweaponry.com/shopexd.asp?id=394&bc=no#axzz3GmMz8KW5

Q.D. Sling Swivel:

http://www.windhamweaponry.com/shopexd.asp?id=386&bc=no#axzz3GmMz8KW5

Blackhawk 1 Point Storm Sling for AR15 / M16: 

http://www.windhamweaponry.com/shopexd.asp?id=245&bc=no#axzz3GmMz8KW5

 

CUSTOMER SERVICE CORNER         Cheryl E
Cheryl Eliason, Customer Service Manager
 

We receive a variety of customer service related questions from our customers, and in order to better serve all of you, highlight one question each month.

This month’s question is:

 

What flip up sights can I use on my Windham Weaponry Carbon Fiber rifle?

Answer:

The top rail of our Carbon Fiber rifles is slightly higher than the Picatinny gas block.

When using flip up sights you must use a front sight made for “same plane” sighting but change the front sight post out to a .040 taller one.

 

If you have any questions about parts compatibility please give us call (1-855-808-1888).

 

FROM THE EDITOR   

 

Karen Fogarty, Asst. to VP Sales & Marketing

 

 

 

  

 

 

CUSTOMER FEEDBACK

Thanks Windham Weaponry! I am excited about my new rifle and I chose Windham as a happy and longtime Bushmaster customer and Fan. Thanks for your welcome and your courteous and professional interaction when I called in to activate my Limited Lifetime Warranty.

Thanks again! I’m looking forward to being a happy, supportive and longtime Windham Weaponry Customer and Fan!

Jackie B.

*******************************************************************************************************************************

Joe L. sent us a photo of his Windham Weaponry Carbon Fiber accessorized with a Boyd’s laminated wood set.

BEFORE

 

AFTER

Joe said “Cheryl – Thanks for your help, as well as all the guys at Windham. Wait till the next rifle!!!”

 

 

To send Newsletter comments or suggestions, contact:

newsletter@windhamweaponry.com

 

WINDHAM WEAPONRY FEATURED PRODUCTS

 

Matt H - Retail
Matt Hasty
Retail Sales Manager

 

 

Windham Weaponry Orange / Camo Hat

 

 

Part Number: ACC-BCAP-ORG

 

Price: $19.95

 

In a combination of Safety Orange & Camo, this is the hat you’ll want take on your next hunting trip. With a sturdy camo pattern visor, this comfortable “one size fits all” hat features a black embroidered Windham Weaponry logo on the front with an adjustable Velcro back-strap for snug fit.

 

Bore-Tips Gun Cleaning Swabs for .223/5.56
Part Number: BORETIP-223
Price: $4.95
 

Bore-tips® by Swab-its® are the newest technology in firearm cleaning that offers fast patchless cleaning for your .22/.223/5.56mm rifle. Bore-tips® are tough, reusable foam tips engineered for a tight bore fit that provides 360° of contact with all the lands and grooves of the rifling. No more messing with jags or having to load poor fitting patches to the cleaning rod. Bore-tips thread onto a standard 8-32 cleaning rod. Manufactured by Super Brush, LLC, the leader in foam swab technology and proudly made in the U.S.A., Bore-tips® perform better than patches and offer complete coverage and delivery of cleaning solvents and oils to the firearm. They are reusable, can be cleaned with mineral spirits, and offer a very economical way to keep your firearm clean.

 

BUY IT NOW

Bore-Tips Gun Cleaning Swabs for .30 caliber

Part Number: BORETIP-30CAL

Price: $4.95

 

Bore-tips® by Swab-its® offer fast patchless firearm cleaning for your .30 caliber rifle. Bore-tips are tough, reusable foam tips engineered for a tight bore fit that provides 360° of contact with all the lands and grooves of the rifling and eliminate using jags or having to load poor fitting patches to the cleaning rod. Bore-tips thread onto standard 8-32 cleaning rods. Proudly made in the U.S.A. by Super Brush, LLC – the leader in foam swab technology, Bore-tips perform better than patches, and offer complete coverage and delivery of cleaning solvents and oils to the firearm. They are completely reusable and can be cleaned with mineral spirits to offer the most economical way to keep your firearm clean.

 

LAW ENFORCEMENT

Todd C

Todd J. Coons, VP Law Enforcement Sales

What’s New in LE?

September was another great month for LE sales at Windham Weaponry. It is clear that many out there took advantage of the $50 discount on the rifles for the Individual Officer Program.

With the turning of the calendar and moving into October, it has brought with it cooler temperatures and the changing of the leaves. It has also brought a spike in .308 sales, as many out there are getting ready for hunting season.

So, for those of you on the fence about making a 308 purchase, have I got a deal for you. Until November 22nd, I’m going to be offering a $50 discount on any of our 308 rifles.

$50 Off On Any .308 Rifle with Free Shipping to FFLs in the USA – Until November 22nd.

To qualify for the program and the added discount, you must be active or retired Law Enforcement or Military. I will also provide FREE shipping to your FFL anywhere in the continental United States. To view my rifles, please visit the website at windhamweaponry.com/le/weapons.asp#axzz38yWfyqpl  and if you don’t see what you want, please let us know and we’ll see if we can custom build it for you.

For pricing, please email my assistant, Cindy, at Cthompson@windhamweaponry.com  or me at

Tcoons@windhamweaponry.com

R16FTT-308

 

R16SFST-308 

R18FSFST-308

Be Safe,

Todd J. Coons

VP Law Enforcement Sales    

Meet the WINDHAM WEAPONRY TEAM
 
Mark Eliason,  Mark at SFGC Vice Pres., Sales & Marketing

Mark has been in the firearms industry for 25 years, joining Bushmaster Firearms in their early years as a high school student in production and then returning after college and taking the challenge of filling the role of National Sales Manager.  After Bushmaster closed its Maine facility, Mark was excited to join the new adventure of Windham Weaponry to head up the Sales team.  With great enthusiasm, Mark and the entire Windham Weaponry team set out to begin building a new firearms legacy that we can all be very proud of.

He is known throughout the industry as hard-working, friendly and creative, with a sense of humor that is both warm and comical.  There is never a shortage of laughter and good humor when Mark is present.

Mark enjoys ATV riding, fishing, hunting and spending time at his camp in Northern Maine.  He is also a train enthusiast.  In fact, Mark is such a train buff that he owned a pig roaster nicknamed “The Chew Chew Train”!

 

  

Windham Weaponry on AR15.com
AR15.com Logo
    We regularly respond to questions and topics on this informative website.

 

Contact Us:
 

 

Windham Weaponry, Inc.
999 Roosevelt Trail / PO Box 1900

 

Windham, Maine  04062   U.S.A. 
Tel: 207-893-2223
Fax: 207-893-1623
 

 

Phone Sales/Customer Service:
Toll Free: 1-855-808-1888

 

 

 

Your feedback is always welcome. Feel free to send us photos of how you enjoy using your Windham Weaponry rifle. We would love to hear from you. Please contact us through  windhamweaponry.com/  or

 

 
SHOOT SAFELY,
Windham Weaponry Logo

Newsletter – Vol. 3 / Issue 9

Welcome to The Windham Weaponry Newsletter – Vol. 3 / Issue 9
September 2014
 

 

Marketing News Mark at SFGC

 

Mark Eliason, VP Sales & Marketing

 

This month we are introducing our latest addition to the Windham Weaponry product line in the popular 7.62x39mm caliber. We are shipping now – both complete rifles in the SRC configuration and 7.62x39m cal. Upper Assemblies”.

Keep checking our website for new items this fall!

This Month’s Featured Rifle
Windham Weaponry 7.62x39mm SRC 
 
Model: R16M4FTT-762   MSRP: $1056.00

Weight: 6.15 lbs. without magazine   Length: 36.125″ (32.375″ with Telestock collapsed)

Caliber: 7.62 x 39mm

 

Type:  Rifle – Semi-Automatic, Gas Impingement System

Capacity: 30 + 1 – Ships with one 30 Round Magazine

Receivers: Forged 7075 T6 Aluminum –  Flat Top Upper Receiver

 

Bolt:  Carpenter 158 Steel

Barrel:  16″ M4 Profile – Chrome Lined with A2 Flash Suppressor

Barrel Material: 4150 Chrome Moly Vanadium 11595E Steel

Rifling: 1 Turn in 9.5″ – Right Hand Twist

Stock / Pistol Grip: 6 Position Telestock with Windham Weaponry logo / A2 Black Plastic Pistol Grip 

Forend: M4 Double Heat Shielded Handguards

 

Rear Sight: None – Ready for optics or other type accessory sights

Front Sight: None – Ready for accessory sights on Mil Std 1913 Rail Gas Block

Includes: Hard Plastic Carrying Case, Black Web Sling, Operators Manual, Transferable Lifetime Warranty

 

FROM THE GUNSMITH’S BENCH
Erik at his bench
Erik Winter, Gunsmith
 
TOPIC: 

 

Removing a Blown Primer From Your Lower

 

This isn’t a terribly common occurrence but it does happen from time to time.  All of a sudden for no apparent reason you can’t pull the trigger or move the safety on your AR15. The hammer is stuck in the cocked position and will not move no matter how hard you try to pull the trigger.


Nine times out of ten this is because a primer blew out of a case as it was fired and fell into the lower. The primer rolls under the trigger and jams underneath the back of the trigger.  If this happens clear the rifle and remove the lower from the upper receiver by pushing out the takedown and pivot pins.

First try shaking the lower upside down while trying to move the hammer, trigger and safety. Sometimes you can jar the blown primer loose and shake it out of the lower. If this doesn’t work than it is a fairly simple matter of removing the hammer and the trigger and removing the blown primer.

First look into the lower and note how the parts fit into the lower receiver to make it easier when you reassemble. Note how the legs of the hammer spring are on top of the trigger pin. To remove the hammer and trigger pins use a punch that is about 1/8″. Punch the hammer pin out of the lower. The hammer will probably be stuck to the rear still. Keep in mind that the hammer is under tension and is going to come flying out of the lower when it is released. So have the lower pointed in a safe direction and also where the hammer can’t get lost when it comes out of the lower.  You may have to pull the trigger to get the hammer to release from the lower.


Once the hammer is out you may see the primer inside. You may be able to get it unstuck without removing the trigger at this point by using a small pick or punch.

If not just drive out the trigger pin and remove the trigger. The disconnector will also come out with the trigger. Note its orientation.

 

You will see the primer in the lower at this point. Also make sure there isn’t any other debris in the lower that might interfere with the proper operation of the rifle.

Reassemble the trigger and disconnector and push them back into the lower. Line up the hole in the disconnector with the holes in the hammer and push the trigger pin back in. Then reinstall the hammer making sure the legs of the spring rest on top of the trigger pin and push the hammer pin back in.

Blown primers do happen from time to time with reloads or factory ammunition so when you find a blown primer it doesn’t mean there is anything wrong with your rifle. However, if you are experiencing blown primers commonly with factory ammunition this does indicate that there may be a chamber problem with the rifle.

 

CUSTOMER SERVICE CORNER         Cheryl E
Cheryl Eliason, Customer Service Manager
 

We receive a variety of customer service related questions from our customers, and in order to better serve all of you, highlight one question each month.

This month’s question is:

 

What is the Special Build Program ?

 

 

Answer:

Our Special Build Program allows you to order through your local FFL Dealer a uniquely configured rifle from the factory to suit your individual taste and shooting style. Most Windham Weaponry rifle models can be ordered with a wide variety of our Windham Weaponry accessories custom installed by our professional Gunsmiths.

First choose the rifle and list of accessories we offer that you would like installed on your rifle. Then visit your local FFL gun dealer and ask them to call us for pricing.

The dealer will order the rifle, we will build it and ship directly to your dealer.

If you have any questions about parts compatibility please give us call.

 

FROM THE EDITOR

Karen Fogarty, Asst. to VP Sales & Marketing

 

 

 

  

 

 

CUSTOMER FEEDBACK

Subject: I Love My My Windham Weaponry SRC

I have had my SRC for a year and a half, and I love it. I have changed out the hand guard and gas block and have added a muzzle brake, Eotech optics, NcStar laser/light, and Magpul grip and backup sights, but the core components have been working great with over 2000 rounds put through her. I am looking to upgrade the trigger with the drop in model on your website. You can view my videos shooting the weapon at youtube.com, and you can find the videos on my channel under the username dolfinsphan. The first pic is the day I got her, and I know, I know, bad trigger etiquette, but I know better now, and I have learned a lot more over the past 19 months.  Thanks Windham Weaponry!!

Dante F.

******************************************************

Hello, this is Joe from Kentucky.

I am a Law Enforcement officer from Kentucky, and I recently purchased the WW 20 inch Govt rifle, as my personal rifle. Yesterday, 7/21/2014, myself and a fellow Law Enforcement officer, who shoots a Colt 20 inch Govt rifle went to the range. Out of the box I zeroed my WW rife in at 50 yards with nine rounds. We shot approximately 500 rounds in our rifles, and I had Zero malfunctions, I used several different magazines and shot an assortment of different ammo. The WW shot flawlessly. The WW 20 inch Govt rifle is an outstanding product, Thanks.

PS. My friend’s Colt previously had two malfunctions, (failure to feed).

******************************************************

3 new Windham Weaponry Muddy Girls: Haley, Renee and Madison – Vassalboro, Maine

 

******************************************************

 

To send Newsletter comments or suggestions, contact:

newsletter@windhamweaponry.com

 

WINDHAM WEAPONRY FEATURED PRODUCTS

 

Matt H - Retail
Matt Hasty
Retail Sales Manager

 

 

ARK Defense SOPMOD Stock for AR15 / M16

 

 

Part Number: STK-ARK-SOPMOD-BLK

 

Price: $89.95

 

 

ARK Defense’s Enhanced SOPMOD Buttstock features a contoured shoulder rest for multiple shooting positions and a snag resistant shielded release lever. Quick Release Sling Swivels can be attached to either side, and a comfortable shoulder pad provides positive non-slip contact surface. Two Battery/Cleaning Kit storage compartments measure 25/32″ diameter X 5 1/2″ deep. A patent pending attachment method provides smooth, rattle-free action and proper fit to receiver tubes. Constructed of US DOD approved MIL-SPEC material with stainless steel internal components – weight is 12 oz. It fits commercial extension tubes. Made in the USA.

   

LAW ENFORCEMENT

Todd C

Todd J. Coons, VP Law Enforcement Sales

What’s New in LE?

I was able to attend the Connecticut SWAT Challenge in August and I have to say it was a great event. I was able to meet so many officers from all over New England. I would like to say “Thank You” to all of you that came by the booth to say hello.

The Deal for September!

August was a great month for Law Enforcement Sales here at Windham Weaponry. The sales promotion for Individual Officers was a huge success. I have been contacted by so many asking if one could make a purchase for September and receive the discount. So I’m going to extend the $50 discount.

For the entire month of September, I will be taking $50 off any rifle purchased under my Individual Officer Program. With the introduction of the 18″ fluted barrel for the .308, and the 7.62×39, this will give everyone a chance to take advantage of the special pricing.

To qualify for the program and the added discount, you must be active or retired Law Enforcement or Military. I will also provide FREE shipping to your FFL anywhere in the continental United States. To view my rifles please visit the website at windhamweaponry.com/le/weapons.asp#axzz38yWfyqpl  and if you don’t see what you want, please let us know and we’ll see if we can custom build it for you.

For pricing, please email my assistant, Cindy, at Cthompson@windhamweaponry.com  or me at

Tcoons@windhamweaponry.com

Here is a look at the NEW 7.62×39 – Contact us at the above email for pricing.

 

 

 

Be Safe,

Todd J. Coons

VP Law Enforcement Sales    

Meet the WINDHAM WEAPONRY TEAM
Roger Cote,  Quality Control

Roger started working for Windham Weaponry in August of 2011 and worked for Bushmaster for 3 years prior to that, all in the Quality Control department.

 

He served in the U.S. Coast Guard and later served in the U.S. Army Reserves for a total of 10 years of service. He was a weapons mechanic (a/k/a Gunsmith) and had two overseas tours, one of which was a tour in Iraq in 2006-2007. He worked at a small arms repair shop repairing every weapon from a 9mm pistol to the Browning 50 cal. machine gun, and many other foreign weapons.  After his tour, he felt fortunate to become employed at Bushmaster for 3 years prior to its move, but was extremely thrilled to receive the call from Windham Weaponry to help open the quality department.

 

In his free time, Roger says “I love spending time with my beautiful wife, our two boys and our Siberian Husky. I also enjoy spending time outdoors with my family. We love to go sightseeing at the great state of Maine’s beaches, lakes and mountains. I also enjoy learning how to fly RC Helicopters and taking my older son shooting with his own Windham Weaponry rifle.”

Windham Weaponry on AR15.com
AR15.com Logo
    We regularly respond to questions and topics on this informative website.

 

Contact Us:
 

 

Windham Weaponry, Inc.
999 Roosevelt Trail / PO Box 1900

 

Windham, Maine  04062   U.S.A. 
Tel: 207-893-2223
Fax: 207-893-1623
 

 

Phone Sales/Customer Service:
Toll Free: 1-855-808-1888

 

 

 

Your feedback is always welcome. Feel free to send us photos of how you enjoy using your Windham Weaponry rifle. We would love to hear from you. Please contact us through  windhamweaponry.com/  or

 

 
SHOOT SAFELY,
Windham Weaponry Logo

 

Newsletter – Vol. 3 / Issue 8

 

Welcome to The Windham Weaponry Newsletter – Vol. 3 / Issue 8
August 2014

 

Marketing News Mark at SFGC

 

Mark Eliason, VP Sales & Marketing

 

This month’s featured rifle is our SRC .308 finished in TimberTec Green camo.  This model can be ordered through our Special Build Program, which allows you to order uniquely configured rifles through your FFL Dealer direct from the factory to suit your individual tastes and shooting style. Most Windham Weaponry rifle models can now be ordered with a wide variety of our Windham Weaponry accessories custom installed by our professional Gunsmiths.  For more information on that program, LINK HERE.

Also, be sure to check out our Dog Days of Summer promotion, featuring 7 different items each week at a 20% discount.  LINK HERE.

This Month’s Featured Rifle
Windham Weaponry TimberTec Camo 308 SRC 
 
Model: R16FTT-308-C3   MSRP: $1680

Weight: 7.55 lbs. without magazine   Length: 38″ (34.175″ with Telestock collapsed)

Caliber: .308 Win. / 7.62 x 51mm

 

Type:  Rifle – Semi-Automatic, Gas Impingement System

Capacity: 20 + 1 – Ships with one 20 Round Magpul PMag Magazine

Receivers: Forged 7075 T6 Aluminum –  Flat Top Upper Receiver – TimberTec Camo Finished

 

Bolt:  Carpenter 158 Steel

Barrel:  16.5″ Medium Profile – Chrome Lined with A2 Flash Suppressor

Barrel Material: 4150 Chrome Moly Vanadium 11595E Steel with M4 Feed Ramps

Rifling: 1 Turn in 10″ – Right Hand Twist

Stock / Pistol Grip: WW 6 Position Telestock w. TimberTec Camo Finish / Stark Grip w. TimberTec Camo Finish 

Forend: Midlength Shielded Handguards

 

Rear Sight: None – Ready for optics or other type accessory sights

Front Sight: None – Ready for accessory sights on Full Length Mil Std 1913 Railed Forend

Includes: Hard Plastic Carrying Case, Black Web Sling, Operators Manual, Transferable Lifetime Warranty

 

FROM THE GUNSMITH’S BENCH
Erik at his bench
Erik Winter, Gunsmith
 
TOPIC: 

 

How to install the Osprey Carbine Gas Piston Kit

 

Video available here

 

  1. Verify your weapon is safe
  2. Remove Bolt Carrier Group
  3. Remove Firing Pin Retaining Pin
  4. Remove Bolt Cam Pin
  5. Remove Bolt
  6. Carefully remove the 3 gas rings. They are not needed
  7. Install existing Bolt into the New Bolt Carrier
  8. Align Bolt and install Bolt Cam Pin
  9. Insert Firing Pin and Firing Pin Retaining Pin
  10. Remove existing handguards. You will not need them
  11. Using a 1/16″ punch, remove the Gas Tube Spring Pin. You will not need it
  12. Remove Gas Tube from Front Sight and Upper Receiver
  13. Install Bushing into Upper Receiver using a military style cleaning rod
  14. Install Piston Chamber into the Gas Port of Front Sight
  15. Using a 1/16″ punch, verify the holes are aligned
  16. Install the solid Pin included with the kit into the Front Sight
  17. DO NOT USE OLD GAS TUBE SPRING PIN
  18. Make sure it is flush with the Front Sight
  19. Take note of orientation of the Operation Rod flat part, it needs to be facing up
  20. Install Operation Rod into Upper Receiver
  21. Insert Piston into Piston Chamber
  22. With flat part facing up, assembly both parts together
  23. Install Operation Rod Clip into hole
  24. Use a flat head screwdriver to secure the rod clip around the Operation Rod
  25. Make sure the assembly moves freely
  26. Install new handguards. DO NOT USE OLD ONES. They are different
  27. Verify you can see the Operation Rod inside the Upper Receiver
  28. Install Bolt Carrier Group
  29. You are done!

CUSTOMER SERVICE CORNER         Cheryl E
Cheryl Eliason, Customer Service Manager
 

We receive a variety of customer service related questions from our customers, and in order to better serve all of you, highlight one question each month.

This month’s question is:

 

Do you offer a printed catalog ?

Answer:

Our newest 2014 catalog is now available.  It includes are latest rifle models, parts and accessories.

Rifles are only available through an FFL gun dealer.  Parts and accessories may be purchased directly from us by telephone, email or mail order.

 

You can click this link to download or request a printed copy.

 

FROM THE EDITOR

Karen Fogarty, Asst. to VP Sales & Marketing

 

 

 

  

 

 

CUSTOMER FEEDBACK

******************************************************

Hunting with Jack and my SRC.

 

Ed F.

******************************************************

Hello:

I am a satisfied Windham Weaponry owner and just want to pass on my thanks for the time and effort in putting the Windham Newsletter together. I look forward to receiving it and enjoy it. It is very informative and it has been rewarding to see how the company has grown and the success the company has had since it opened. I particularly enjoyed and got a good laugh out of this month’s letter with the “Pack” feature.

Many thanks for an outstanding newsletter.

Regards,

Ron T.

******************************************************

Subject: My new 16″ Heavy Barrel Kit

I got it today, and it was outstanding. Just installed on new upper and I could not be happier with the quality, fit and finish. I’m more than pleased and I’m glad you suggested about a heavy barrel being a more balanced feel.  I’m very happy. Below is a pic.

Robert H.

******************************************************

 

To send Newsletter comments or suggestions, contact:

newsletter@windhamweaponry.com

 

WINDHAM WEAPONRY FEATURED PRODUCTS

 

Matt H - Retail
Matt Hasty
Retail Sales Manager

 

 

MS Cleaning Kit

 

 

Part Number: CLEANKIT-MSCLEAN

 

Price: $39.95

 

 

The unique MS Clean Cleaning Kit contains everything you need to keep your rifle in top functioning form, all housed in an uncrushable magazine shaped box with slide-off cover. This box, though shaped like a 30 Rd. magazine, cannot be inserted into the magwell, but will fit in magazine pouches for convenience. Complete with sectioned steel rods, T-handle, steel patch eyelet, all-purpose double ended brush, .223/5.56 bore brush, chamber brush, dental pick and a 5ml tube of FIREClean CLP. External Dimensions: Depth – .95″/ Width – 2.65″/ Length 8″.

  

LAW ENFORCEMENT

Todd C

Todd J. Coons, VP Law Enforcement Sales

What’s New in LE?

July brought with it warmer temperatures and new budgets for police departments around the country. I’m happy to say that many of the departments have chosen to go with Windham Weaponry when it comes to making their new AR rifle purchases. So, if your department is going to be looking for new ARs this year, please give me a call. I can custom build most rifle configurations, send you a T/E and still have the BEST price.

As many of you are aware, I introduced our new AR Pistol. 11.5″ barrel with a 1×7 twist and a 10″ Midwest Industry SS Key Mod free float hand guard. We shipped the first AR Pistols on July 30th. It was a HUGE success in sales for the month and the pistol will be on special until August 16th, so please reach out to me if you would like pricing and info on how to place an order.

The Deal for August!

For the entire month of August, I will be taking $50 off of any rifle purchased under my Individual Officer program.  To qualify for the program and the added discount, you must be active or retired Law Enforcement or Military. I will also provide FREE shipping to your FFL anywhere in the continental United States.

To view my rifles please visit the website at windhamweaponry.com/le/weapons.asp#axzz38yWfyqpl  and if you don’t see what you want, please let us know and we’ll see if we can custom build it for you.

For pricing, please email my assistant, Cindy, at Cthompson@windhamweaponry.com  or me at

Tcoons@windhamweaponry.com

 

Be Safe,

Todd J. Coons

VP Law Enforcement Sales    

Meet the WINDHAM WEAPONRY TEAM
Mary Howard, Purchasing

Mary works with the purchasing team at Windham Weaponry.

She has been in the firearms industry since 2004, when she started in the Bushmaster Production Department. From there she moved to Quality Control for a year, then onto the Outsourcing Department, moving product through finish, and was in this position until the closing in May 2011.  She joined the new Windham Weaponry company in December 2012, returning to the Outsourcing Department.

Mary lives Windham with her family, husband Scott, three boys, Brett, Derek and Lucas, and their dog “Boston”.  They are very big fans of Boston sports, enjoy taking the kids to Portland Sea Dogs games and watching the boys play sports in Windham school system.  She is very active in helping out with local fundraising activities to support the schools and sports in Windham, and loves spending time with family and friends, cooking and photography.

 

Windham Weaponry on AR15.com
AR15.com Logo
    We regularly respond to questions and topics on this informative website.

 

Contact Us:
 

 

Windham Weaponry, Inc.
999 Roosevelt Trail / PO Box 1900

 

Windham, Maine  04062   U.S.A. 
Tel: 207-893-2223
Fax: 207-893-1623
 

 

Phone Sales/Customer Service:
Toll Free: 1-855-808-1888

 

 

 

Your feedback is always welcome. Feel free to send us photos of how you enjoy using your Windham Weaponry rifle. We would love to hear from you. Please contact us through  windhamweaponry.com/  or

 

 
SHOOT SAFELY,
Windham Weaponry Logo

Newsletter – Vol. 3 / Issue 7

Welcome to The Windham Weaponry Newsletter – Vol. 3 / Issue 7
July 2014

 

Marketing News Mark at SFGC

 

Mark Eliason, VP Sales & Marketing

 

Windham Weaponry is celebrating the arrival of the Summer months with our Dog Days of Summer promotion. Each week we will feature 7 different items, all at a 20% OFF discount. See windhamweaponry.com/.

Each week will also feature a beloved Windham Weaponry family pet. Be sure to check out our Meet the Windham Weaponry Team section in this Newsletter, as this month we are featuring all of the dogs you’ll see in our Dog Days of Summer promotion. Woof!

 

This Month’s Featured Rifle
Windham Weaponry SRC-308-SS15 
 

Model: R16SFST-308   Weight: 8.0 lbs. without magazine   Length: 38″ (34.175″ with Telestock collapsed)

Caliber: .308 Win. / 7.62 x 51mm

 

Type:  Rifle – Semi-Automatic, Gas Impingement System

Capacity: 20 + 1 – Ships with one 20 Round Magpul PMag Magazine

Receivers: Forged 7075 T6 Aluminum –  Flat Top Upper Receiver – Black Anodize Finished – 2 QD Sling Swivel Sockets

 

Bolt:  Carpenter 158 Steel

Barrel:  16″ Medium Profile – Chrome Lined with BCM MOD 1 Compensator

Barrel Material: 4150 Chrome Moly Vanadium 11595E Steel with M4 Feed Ramps

Rifling: 1 Turn in 10″ – Right Hand Twist

Stock / Pistol Grip: WW 6 Position Telestock / Hogue Overmolded Beavertail Pistol Grip 

Forend: Midwest Industries 15″ Free Float SS Key Mod Forend w. 2″ Rail Segment

 

Rear Sight: None – Ready for optics or other type accessory sights

Front Sight: None – Ready for accessory sights on Full Length Mil Std 1913 Railed Forend

Includes: Hard Plastic Carrying Case, Black Web Sling, Operators Manual, Transferable Lifetime Warranty

 

FROM THE GUNSMITH’S BENCH
Erik at his bench
Erik Winter, Gunsmith
 
TOPIC: 

 

How to change a standard rifle stock to a tele stock

 

First make sure the rifle is unloaded. Then remove the upper from the lower by pushing out the takedown and pivot pins. Put the lower receiver on an AR15 lower receiver vice block and remove the upper rear stock screw with a flat screwdriver. Remove stock body.

 

Remove takedown pin detent spring from lower and set aside

Remove buffer and spring by pushing down on buffer retainer and releasing the buffer and spring.

Remove both completely from the lower and set aside.

   

With the cutout portion of the tele stock wrench loosen the buffer tube but don’t unscrew it all the way. (If you are not using this style of tele stock wrench simply use an end wrench)

Before doing so make sure you put a thumb over the buffer detent to keep it from shooting out of the lower when you turn the buffer tube all the way off. Release the buffer detent and spring slowly and leave them in the lower.

   

 

Screw the tele stock buffer tube all the way in while holding the buffer retainer down with your thumb. Turn the stock in until it stops against the retainer, then back it off until it holds the retainer in, but isn’t rubbing on it hard. The buffer retainer should move up and down freely when you press on it.

 

Stock should be straight with the pistol grip

Reinstall takedown pin detent spring. Make sure it is square against the tele stock endplate and push the spring in then screw the castle nut up against it.

   

Tighten castle nut down snugly with the wrench. It is also okay to use a little blue Loctite on the threads to keep it from loosening. (Or stake the nut on if you want a more permanent installation. I covered castle nut staking in the May 2013 newsletter.)

 

Push the carbine buffer and spring that came with the tele stock assembly into the buffer tube and you are done.

   

To remove a tele stock and install a standard stock assembly you basically just reverse these instructions. The only thing to be mindful of is to back the castle nut off enough to remove the takedown pin detent spring completely before turning the tele stock off so you don’t damage it.

 

CUSTOMER SERVICE CORNER         Cheryl E
Cheryl Eliason, Customer Service Manager
 

We receive a variety of customer service related questions from our customers, and in order to better serve all of you, highlight one question each month.

This month’s question is:

 

How do I obtain a copy of your Operators Manual ?

Answer:

A PDF copy of our Operating and Safety Manual is available on our website.  Just go to windhamweaponry.com/  and click on “Media Center” under Misc. you will find the Rifle Operator’s Manual.

 

Here is the link to the pdf:

https://windhamweaponry.com/pdf/W-W%20OpMan-2-4-2013.pdf

You can also request a paper copy by calling Customer Service at 1-855-808-1888 or email us at information@windhamweaponry.com

 

 

FROM THE EDITOR

Karen Fogarty, Asst. to VP Sales & Marketing

 

 

 

  

 

 

CUSTOMER FEEDBACK

******************************************************

Subject: 100 yard target

I am still getting used to the new gun.

Windham VEX Varmint Package

25 shots;  23 in center with 2 fliers.   A 25 cent piece for comparison.

Target shot on June 11.

Range:  100 yards

Hot, winds calm.  Southern Shooting Center,   Thibodeaux, Louisiana

Fired from heavy cement bench with sand bags.

68 grain Hornady Match bullets

25.0 grains of W 748;  standard Winchester primers

Full length resized;  bullets set with Redding Precision Seater Die.

Scope:  4 1/2 to 14 Leupold Mil Dot 30 m/m/

The two fliers at 10 o’clock and 5 o’clock were my fault;  probably flinching from other rifles shooting near me.

Overall a good day with the Windham.

   

Dan M.

**************************************************

Subject: Thanks

Dear Windham Weaponry,

I just wanted to say how much I love my Windham SRC. This is my first rifle and you have set a very high standard for future purchases.  I am looking forward to deer season – its been 30 years since my last hunt. I am even planning a wild boar hunt with my brother in Texas.  My  SRC is the best father’s day gift ever!

Alberto in Michigan.

**********************************************************

Very pleased with the SRC I purchased recently.  Very accurate once it was zeroed in.  Spoke with customer service recently regarding some parts and very impressed with your support staff.

Keep up the great work.  You guys feel like family.

Tim B.

South Carolina

*********************************************************

 

To send Newsletter comments or suggestions, contact:

newsletter@windhamweaponry.com

 

WINDHAM WEAPONRY FEATURED PRODUCTS

 

Matt H - Retail
Matt Hasty
Retail Sales Manager

 

 

CMC Tactical Curved Trigger 3.5 Pound Pull Single Stage Trigger for AR platform rifles

 

 

Part Number: 8448592-CMC

 

Price: $179.95

 

 

This CMC Tactical Trigger Group is a completely self-contained, 100% drop-in fire control group upgrade for the AR-15, LR-308 and AR-10 rifles. The double patented Tactical Curved Trigger design yields truly remarkable and unprecedented trigger control, trigger feel and accuracy, while also the retaining the rugged reliability of a Mil-Spec trigger group. Trigger pull is factory pre-set to 3.5 pounds (not user adjustable). Fits most standard Mil-Spec lower receivers with .154″ trigger and hammer pin holes. This patented one piece assembly installs in minutes – simply insert the one piece assembly and install the supplied anti-walk pins. It is contained in a high grade 410 stainless steel housing with full strength music wire springs for fast lock-time and reliable discharge with factory or military ammo. There are no screws or adjustability in this design – factory tuned for a superior trigger pull with minimum take-up and over-travel. Note: not recommended for use with 5.45 x 39.

Does not fit Colt AR-15 with sear block.

  

LAW ENFORCEMENT

Todd C

Todd J. Coons, VP Law Enforcement Sales

What’s New in LE?

June was another great month for Windham Weaponry Law Enforcement Sales. I was able to attend the National Sheriff’s Associations Convention in Dallas-Fort Worth. The Convention was awesome and the attendance was as well. I had the opportunity to meet so many Deputies and Sheriffs from all over the country that I have done business with over the past 2 ½ years. So a BIG THANK YOU to all of you that stopped by the booth.

After attending the convention, I headed to Victoria TX to hunt hogs with officers from South Texas. I would like to send out a very special thanks to Gary and Jimmy for making this possible for the second year in a row. Todd from EoTech and Chip from ATN supplied the thermal optics for the hunt and I would like to thank both of them as well. It was a great 3 days of hog hunting as we were able to bag nearly 60 hogs. Sadly, we didn’t put a dent in the population, but we sure tried.

Introducing a New AR Pistol Configuration at a Special Price.

From July 16th to August 11th I’m going to be offering the RP11SFS-7 at a special pricing for active and retired law enforcement and military.  Please contact me for pricing on this new pistol configuration.

 

Tcoons@windhamweaponry.com

 

Be Safe,

Todd J. Coons

VP Law Enforcement Sales    

Meet the WINDHAM WEAPONRY “PACK”

“Ollie”

 

To bring attention to our “Dog Days of Summer” Promotion where we’re featuring great deals every week through the end of August, we thought we’d give you “previews of coming attractions”. These pals will be featured on our website, so check windhamweaponry.com/ every week to see who’s barking about the great deals!

Dogs play such an integral part in everyones’s lives, and that’s no different at Windham Weaponry. At the factory every day, you’ll see a number of “dogs in residence”, and their canine compatibility keeps things enjoyable for all.

   

                                “Josie”                                                                         “Charlie”
    
                    “Rowdy & Shelby”                                                          “Hawkeye”
                                            “Girl”                                                                     “Maddie”

   

“Bear”

           “Deputy Dawg”, “Emily,
                       “Zip” (in back) & “Haley”

Windham Weaponry on AR15.com
AR15.com Logo
    We regularly respond to questions and topics on this informative website.

 

Contact Us:
 

 

Windham Weaponry, Inc.
999 Roosevelt Trail / PO Box 1900

 

Windham, Maine  04062   U.S.A. 
Tel: 207-893-2223
Fax: 207-893-1623
 

 

Phone Sales/Customer Service:
Toll Free: 1-855-808-1888

 

 

 

Your feedback is always welcome. Feel free to send us photos of how you enjoy using your Windham Weaponry rifle. We would love to hear from you. Please contact us through  windhamweaponry.com/  or

 

 
SHOOT SAFELY,
Windham Weaponry Logo

Windham Weaponry Rifles – THE BEST out of box

[fusion_builder_container hundred_percent=”no” equal_height_columns=”no” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” background_position=”center center” background_repeat=”no-repeat” fade=”no” background_parallax=”none” parallax_speed=”0.3″ video_aspect_ratio=”16:9″ video_loop=”yes” video_mute=”yes” overlay_opacity=”0.5″ border_style=”solid”][fusion_builder_row][fusion_builder_column type=”1_1″ layout=”1_1″ background_position=”left top” background_color=”” border_size=”” border_color=”” border_style=”solid” border_position=”all” spacing=”yes” background_image=”” background_repeat=”no-repeat” padding=”” margin_top=”0px” margin_bottom=”0px” class=”” id=”” animation_type=”” animation_speed=”0.3″ animation_direction=”left” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” center_content=”no” last=”no” min_height=”” hover_type=”none” link=””][fusion_text]

This is my opinion and evaluation of my favorite line of AR-15 rifles

[/fusion_text][fusion_button link=”https://www.youtube.com/watch?feature=player_detailpage&v=a_5daAwV2CQ” target=”_blank” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” color=”default” stretch=”default” icon_position=”left” icon_divider=”no” animation_direction=”left” animation_speed=”0.3″]Watch Video[/fusion_button][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]

Windham Weaponry SRC 308

Fun Gun Reviews Presents: Windham Weaponry SRC “Sight Ready Carbine” in .308 Winchester. This AR-10 style rifle is excellent quality and yet is lightweight and handy.

0
YOUR CART
0
Your cart is emptyRETURN TO SHOP